The Besanna scanner's LEDs have been programmed to indicate different activities.
- When connecting to or disconnecting from the charge cable, the scanner's GREEN LED will illuminate for 1 minute.
- When waking the scanner from sleep by touching the two sensors, the scanner's GREEN LED will illuminate for 1 minute, indicating that the scanner is ready to perform a scan.
- While holding the scanner and initiating a scan in the app, the scanner's PURPLE LED will momentarily flash, indicating that the scanner is connected to your mobile device and a scan has started.
- During the duration of the scan, the scanner's BLUE LED will illuminate until the scan has finished.
- The scanner's WHITE LED will flash to indicate that the scan has finished. The scanner will then go into a sleep mode after a few seconds and the scanners LEDs will turn off.